In a city, building facades are comparable to thin membranes that divide the inside from the outside. When these membranes open, in the form of doors or windows, what is inside and outside merge into an immaterial, crossable boundary.
Emi is our new solution for the accent lighting of boundary surfaces and transition spaces between the interior and the exterior of the city: thresholds, walls, niches, portals and windows.
Emi is available in two different configurations: BL, a blade of light with a semi-circular opening, and AD, a wall washer with an asymmetrical diffuse distribution. The BL version creates luminous lines to emphasise the perimeter of openings or to outline and connote transit areas. The AD version is ideal for enhancing architectural niches and decorative elements of historic facades.
BL
AD
The products in the Emi line have been designed to respect the aesthetics of the illuminated architecture. For this reason the shapes are linear, simple and essential and the dimensions are extremely small, with a depth of only 53 mm.
Emi has been designed for outdoor installation thanks to its IP66 degree of protection. The elegance of the shape and the compactness of the dimensions make the products of the line also suitable for indoor applications.
Emi is equipped with an ultra dry system: the external cover is independent of the sealing system, which is guaranteed directly on the body, in order to avoid the risk of infiltrations due to an installation on uneven surfaces.
The fastening system designed for the Emi line allows a continuously adjustable inclination of up to 5° to compensate for any sloping installation surfaces.
The Emi line has been set up with a double access point for the power cable: bottom or side. The side inlet is designed to allow the connection to visible electrical installations, typical of historic facades.
Light source and driver unit can be replaced to allow for maintenance or upgrading of the line products.
The product longevity is guaranteed not only by the high lifetime of light sources and drivers, but also by the use of materials that ensure the best resistance to atmospheric agents and an excellent degree of impact resistance.
The main materials used for the realization of the line products are recyclable and the components are easily separable for differentiated disposal.
330 – 350 lm . 4 W
CCT 3000K/4000K
CRI ≥ 80 | SDCM 3
Ta -30° C +50°C
Pre-wiring with outgoing cable L=1,5 m
ON-OFF version: driver included
DALI version: external driver
330 – 350 lm . 4 W
CCT 3000K/4000K
CRI ≥ 80 | SDCM 3
Ta -30° C +50°C
Pre-wiring with outgoing cable L=1,5 m
ON-OFF version: driver included
DALI version: external driver
Die-cast aluminum primary alloy UNI EN AB 47100 (copper content <1%)
High-transparency PMMA
Phospho-chromatation treated and polyester powder-coated in 16 phases to increase weather resistance
Sablé 100 noir
White RAL9003
Grey RAL9006
Corten